CNC Milling

All Products

Aluminum Die Casting fixed block ADC12
- Brand: NONE
- Packaging: carton, PE pallet, wooden pallet, steel box, PE flow box
- Supply Ability: 100000/MONTH
Aluminum Die Casting fixed block ADC12, it is an auto part, which is applied to transmission system. The estimated annual usage is 200k pieces. About The part, should pay attention to the foreign Matter Features:alloy element does not meet the requirements or impurities too much. Causes 1, incorrect ingredients. 2,...

Contact Now

Click for details
Aluminum Die Casting Stationary Barrier ADC12
- Brand: NONE
- Packaging: carton, PE pallet, wooden pallet, steel box, PE flow box
- Supply Ability: 100000/MONTH
Aluminum Die Casting Stationary Barrier ADC12, it is an auto part, which is applied to transmission system. The estimated annual usage is 230k pieces. About The part, should pay attention to the foreign Matter Features:alloy element does not meet the requirements or impurities too much. Causes 1, incorrect...

Contact Now

Click for details
Aluminum Casting parts of distributing pipe ADC12
- Brand: NONE
- Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
- Supply Ability: 200000/MONTH
Aluminum Casting parts of distributing pipe ADC12, the material for this part is ADC-12, a kind of material, having good fluidity, which is good for filling while die casting. This material is a good material to produce end cover, housing, gearbox, bracket etc. The composition of ADC-12 is:(Cu)1.5~3.5, (Si)9.6~12.0,...

Contact Now

Click for details
High Accuracy CNC Machining Shaft Sleeve
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
High Accuracy CNC Machining Shaft Sleeve, About the surface finish of e-coating, for this part, as the flat surface is thin, easy to deform if tumbling, so choose to polish to remove the residual of the gate, the overflow, then use nylon wheel to polish again to enhance the appearance effect. Colored spot should be...

Contact Now

Click for details
ADC12 Die Casting Drive Arm Crank
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 50000/MONTH
Agriculture machines Apparatus Part of High precision CNC Machining, the part has small wall thickness, meanwhile, the part have structure of small cavity, which usually easily cause problem of mold sticking, pull mark etc. this part carried die casting standard of Grade GB-CT4, The part has requirement of surface...

Contact Now

Click for details
Aluminum Die Casting Spray Coating Housings Auto Parts
- Brand: NONE
- Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
- Supply Ability: 60000/MONTH
Aluminum Die Casting NC Housings Auto Parts A380, The material for this part is A380. During the die casting. Higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity. Meanwhile, the...

Contact Now

Click for details
aluminum die casting fluid pump
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
High Pressure Aluminum Die Casting part for Gear Box is a part which is used as Mount head on Gearbox system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now

Click for details
Aluminum Die Casting Mount Bracket
- Brand: NONE
- Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
- Supply Ability: 200000/MONTH
Aluminium Alloy Precision CNC Die Casting Gear Reducer Parts with Competitive Price, The cavity number for this part is 2, according to the required tolerance and dimensions in terms of the prints, the part has difficulty on CNC machining, the wall thickness is small, not much machining allowance left. The part is a...

Contact Now

Click for details
Aluminum Casting Knead and knock Case ADC12
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Alloy Die Casting Knead and knock Case ADC12 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The High Precision...

Contact Now

Click for details
Aluminum Die Casting Communication Equipment Parts
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Die Casting Communication Equipment Parts is a part applied to communication Equipment, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. Below is the detail of this casting Die Casting Machine: 800 ton 1 part per die Material:...

Contact Now

Click for details
aluminum die casting reduction gearbox
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
High Pressure Aluminum Die Casting part for Gear Box The part has requirement of powder coating treatment, so the density of the part is very important, unqualified part usually have a lot of void inside. So the mold design is very important, such as the layout of the location of the injection gate, runner, venting...

Contact Now

Click for details
aluminum die casting decompression valve
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
High Pressure Aluminum Die Casting part for Gear Box is a part which is used as Mount head on Gearbox system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now

Click for details
aluminum die casting oil pressure valve
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
High Pressure Aluminum Die Casting part for Gear Box is a part which is used as Mount head on Gearbox system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now

Click for details
OEM Custom Precision Machining Die Cast Aluminum Parts
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
OEM Custom Precision Machining Die Cast Aluminum Parts It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The products should...

Contact Now

Click for details
Aluminum Casting parts of signal exchanger A380
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Casting parts of signal exchanger-A380 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The High Precision Machining...

Contact Now

Click for details
Aluminum Fabricated Shapes Egatel Feed Cast -6061
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Fabricated Shapes Egatel Feed Cast is a part applied to Transmission Parts Equipment using in the communication circumstances, with the purpose to improve the stability, the comfort, the safety of driving. The Transmission Parts are the signal transmission part for famous electrical corporation. Below is the...

Contact Now

Click for details
aluminum die casting communication horn
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Die Casting Communication Equipment Parts is a part applied to communication Equipment, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. Below is the detail of this casting Die Casting Machine: 800 ton 1 part per die Material:...

Contact Now

Click for details
Aluminum Casting parts of signal exchanger YL102
- Brand: NONE
- Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
- Supply Ability: 60000/MONTH
Aluminum Die Casting NC Housing Auto Parts YL102, The material for this part is YL102. During the die casting. Higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity. Meanwhile,...

Contact Now

Click for details
Aluminum Alloy Die Casting side cover A380
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Alloy Die Casting Knead and knock Case A380 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The High Precision...

Contact Now

Click for details
aluminum die casting boiler heat exchanger
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 90000/MONTH
Aluminum Die Casting Communication Equipment Parts is a part applied to communication Equipment, with the purpose to improve the stability, the comfort, the safety of driving. The CNC Milling part is auto part for famous motor corporation. Below is the detail of this casting Die Casting Machine: 800 ton 1 part per...

Contact Now

Click for details
Aluminium Die Casting Muffler Bracket
- Brand: NONE
- Packaging: carton, PE pallet, wooden pallet, steel box, PE flow box
- Supply Ability: 100000/MONTH
CNC Machining Auto Bracket of High Precision, it is an auto part, which is applied to transmission system, it the housing of the automotive gearbox. The estimated annual usage is 250k pieces. About The part, shoud pay attention to the foreign Matter Features:alloy element does not meet the requirements or impurities...

Contact Now

Click for details
aluminum die casting hydraulic control valve
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
High Pressure Aluminum Die Casting part for Gear Box is a part which is used as Mount head on Gearbox system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now

Click for details
aluminum die casting decompression valve cover
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
High Pressure Aluminum Die Casting part for Gear Box is a part which is used as Mount head on Gearbox system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now

Click for details
OEM Customized Die Casting Motor Mount Bracket
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 210000/MONTH
High Precision CNC Machining House Parts, is a part applied to Motor system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation , so the development is strict, prior to mass production, the customer request to develop proto die to run...

Contact Now

Click for details

Home > Products > High Precision Machining > CNC Milling

China CNC Milling Suppliers

CNC Milling is to use the rotating multitool to cut workpieces, such processing method is efficient. Tool rotate (background) while working, and the workpieces move (as a feed movement), workpieces can also be fixed, but at the moment, rotate tool must also move (at the same time to complete the main motion and feed motion).Milling machine has a horizontal milling machine or vertical milling machine, large gantry milling machine.The machine tool can be ordinary machine tool, can also be a nc machine tools. With rotating cutter as a cutting tool.Milling is generally conducted on milling and boring machine, suitable for processing plane, groove, all kinds of forming surface (such as spline gear and thread) and special shape mould surface, etc
The characteristic of the CNC Milling is:
(1) cutter blade periodically participate in continuous cutting.
(2) each blade in the process of cutting, cutting thickness is variable.
(3) each tooth feeding alpha f (mm/teeth), said cutter every turn a blade workpieces relative displacement of time.