Automotive Wiper Parts

All Products

Auto precision cnc Pump parts
- Brand: NONE
- Packaging: carton, PE pallet, PE pass gate, wooden pallet
- Supply Ability: 70000/MONTH
Auto Precision CNC Pump parts. the material of this part is ADC-12, the part is a housing for Pump system which is used on car. About Auto CNC Pump part .It is the irregular and complex . During the production. not only pay attention to the products' quality. Also should pay attention to staff training in the...

Contact Now

Click for details
Aluminum Die Casting Drive Arm Crank
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 210000/MONTH
Aluminum Die Casting Drive Arm Crank, this part is used as driven arm crank on the windscreen wiper, the carried die casting criterion for this part is Grade GB-CT4, in application, the part will rotate with the driven structure of the wiper, so the mechanical property should at least satisfy tens of thousands of...

Contact Now

Click for details
Casting CNC Machining Pivot Housing A380
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Threaded Pivot Housing of Aluminum, the Wiper Mounting Head part is a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number L017200. The most important point to ensure the quality control for this part is the two long pillars,...

Contact Now

Click for details
High Precision CNC Machining Pivot Case ADC12
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Threaded Pivot Housing of Aluminum, the Wiper Mounting Head part is a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number 421-1040. The most important point to ensure the quality control for this part is the two long pillars,...

Contact Now

Click for details
Aluminum Casting Wiper Mount Adapter
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
Aluminum Casting Wiper Mount Adapter is a small part which is used as Mount head on windscreen wiper system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now

Click for details
Aluminum Die Casting of Motor Side
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Aluminum Die Casting Housing of Motor Side, the part is a housing for DC motor on windscreen wiper system which is applied to bus, boat in daily life, the part is a cover, the mating part is the pivot housing 429-1040, in this part, there is a feature of rail, which is used for the slide of a mating plastic part, so...

Contact Now

Click for details
High Precision CNC Machining Pivot Housing A380
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Double Shaft Pivot Housing, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part is similar to the pivot housing 421-1034 but have two long pins, this pivot side housing have two long threaded pillars, from these two pillars, there to be two shaft...

Contact Now

Click for details
Aluminum Die Casting BNK Knead Knock -YL102
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
Aluminum Die Casting BNK Knead Knock -YL102, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Contact Now

Click for details
Aluminum Die Casting Motor Side Housing
- Brand: NONE
- Packaging: carton, PE pallet, PE pass gate, wooden pallet
- Supply Ability: 70000/MONTH
Aluminum Die Casting Motor Side Housing, the material of this part is ADC-12, the part is a housing for DC motor on windscreen wiper system which is used on bus, boat after assembly, the part is an end cover, work with a mating pivot housing, the DC motor run in these two housing. On this part, there are a lot of...

Contact Now

Click for details
Aluminum Die Casting Mount Bracket of Swing Arm
- Brand: NONE
- Packaging: Carton, PE pallet, Wooden Pallet, Steel Box, Plastic recycle box
- Supply Ability: 45000/MONTH
Aluminum Die Casting Mount Bracket of Swing Arm, it is a part used on wiper system, the manufacturing technology is High Pressure Die Casting, a kind of cold chamber aluminum die casting, the material for this part is ADC-12, a Japanese standard aluminum. this material is supposed to conform to standard of JIS H...

Contact Now

Click for details
aluminum die casting mount head
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 300000/MONTH
The Aluminum Die Casting Wiper Mounting Head is a small part which is used as Mount head on windscreen wiper of bus, boat and car. The technology for this part is high pressure cold chamber die casting, the mold design is very important, like the location of the injection gate, runner, venting system etc. Incorrect...

Contact Now

Click for details
Aluminum Die Casting Middle Bracket in wiper-ADC12
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 180000/MONTH
Aluminum Die Casting Middle Bracket in wiper-ADC12 is a part applied to wiper system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer request to...

Contact Now

Click for details
Section Aluminum Pivot Housing
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 120000/MONTH
Section Aluminum Pivot Housing, it is a part applied to windscreen wiper system, a housing for pivot shaft, the technology for this Automotive Wiper Parts is section extrusion, so it is not a die casting part, the material for this part is 6061 Aluminum, the technology decide that such section material have very good...

Contact Now

Click for details
Threaded Pivot Housing of Aluminum
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Threaded Pivot Housing of Aluminum, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number 421-1040 except the length of the two threaded pillar. It is almost 50 mm longer than pivot 421-1040. The most important...

Contact Now

Click for details
High Precision CNC Machining Pivot Pillar A380
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Single Shaft Pivot Housing, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part is similar to the pivot housing 421-1034, this pivot side housing have a long threaded pillars, from the pillar, there to be one shaft assembled. The key point is to...

Contact Now

Click for details
Aluminum Die Casting Shaft Housing
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 90000/MONTH
Aluminum Die Casting Shaft Housing, This part is a pivot housing for assembling the shaft, which is used on DC motor on wiper system, the part is very similar to pivot housing 421-1034, the difficulty of this part is the feature of the long threaded pillar, it is even longer than 421-1034, the length is up to 115 mm,...

Contact Now

Click for details
Aluminum Windscreen Wiper Mount Head
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 300000/MONTH
The Aluminum Windscreen Wiper Mount Head is a small part which is used as Mount head of windscreen wiper system on bus, boat and car etc. The technology for this part is high pressure aluminum die casting, the mold design is very important, according to our ISO/TS:16949 Certificate, prior to the mold fabrication, the...

Contact Now

Click for details
Aluminum Die Casting BNK Knead Knock -AlSi9Cu3
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
Aluminum Die Casting BNK Knead Knock -AlSi9Cu3, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Contact Now

Click for details
Aluminum Die Casting Wiper Motor Housing
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
Aluminum Die Casting Wiper Motor Housing, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is very...

Contact Now

Click for details
Aluminum Die Casting Pantograph Adapter
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 90000/MONTH
Aluminum Die Casting Pantograph Adapter, the part is a small customized part, which is used on the wiper system. The manufacturing technology for this part is high pressure die casting. We are an OEM die casting factory which specializes in high pressure die casting industry for more than 16 years, we have very rich...

Contact Now

Click for details
Aluminum Alloy Drive Arm Crank
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 210000/MONTH
Aluminum Alloy Drive Arm Crank, through the review to the geometry and the required dimensions and tolerances from the print, we will all find this part is simple, the part is used as driven arm crank on the windscreen wiper, the carried die casting criterion for this part is Grade GB-CT4, in application, the part...

Contact Now

Click for details
Aluminum Die Casting Arm Channel
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Aluminum Die Casting Arm Channel, the part is a bracket for passing and fixing the wire of the windscreen wiper, the standard carried for the die casting work of this part is GBT6414-CT4, this part has a lot of hollow-out structure, which need not only one slide to form. This part has a cylinder structure of φ15.7 mm,...

Contact Now

Click for details
Aluminum Die Casting Middle Bracket in wiper-YL102
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 180000/MONTH
Aluminum Die Casting Middle Bracket in wiper-YL102 is a part applied to wiper system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer request to...

Contact Now

Click for details
Aluminum Die Casting Housing of Pivot Side
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
Aluminum Die Casting Housing of Pivot Side, the part is a pivot side housing, similar to the pivot housing 421-1034 and 421-1035, this pivot side housing have two long threaded pillars, from these two pillars, there to be two shaft assembled. then with a mating motor side housing, the DC motor work inside the...

Contact Now

Click for details

Home > Products > Auto Parts > Automotive Wiper Parts

China Automotive Wiper Parts Suppliers

Automotive Wiper Parts is used on windscreen wiper system on automotive. it is one of the most important safety devices. It can make sure to remove the raindrops while driving in rainy days or remove snow while driving in snowy days, or remove the muddy water splashed on the windshield while driving on the muddy road, to promise the drivers to have good sight line so that the driving can be safe.

Wiper system is mainly composed of wiper arm assembly, wiper linkage, wiper brush, washing pump, liquid storage pot, fluid tube, nozzle etc. The Main function includes single step, intermittent shave, slow wiping, fast wiping and water spray.