Aluminum Alloy Die Casting heat sink A380

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 4000 Piece/Pieces
• Model No.: L000800

Aluminum Alloy Die Casting heat sink A380, This part use A380 as material, a kind of most common material, having good processability, for the physical property, this material have good thermal conductivity. Our Heatsink has the following features 1, beautiful appearance, flexible size. It can be art modeling, also...

Aluminum Alloy Die Casting heat sink ADC12

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 4000 Piece/Pieces
• Model No.: L000802

Aluminum Alloy Die Casting heat sink ADC12, This part use ADC12 as material, a kind of most common material, having good processability, for the physical property, this material have good thermal conductivity. Our Heatsink has the following features 1, beautiful appearance, flexible size. It can be art modeling, also...

Aluminum Alloy Die Casting side cover A380

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L018509

Aluminum Alloy Die Casting Knead and knock Case A380 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The High Precision...

Aluminum Alloy Die Casting heat sink YL102

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 4000 Piece/Pieces
• Model No.: L018509

Aluminum Alloy Die Casting heat sink YL102, This part use YL102 as material, a kind of most common material, having good processability, for the physical property, this material have good thermal conductivity. Our Heatsink has the following features 1, beautiful appearance, flexible size. It can be art modeling, also...

Aluminum Alloy Die Casting side cover YL102

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L018500

Aluminum Alloy Die Casting side cover YL102 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 10k pieces. The High Precision Machining...

Aluminum Alloy Die Casting side cover ADC12

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 4000 Piece/Pieces
• Model No.: L022769

Aluminum Alloy Die Casting side cover ADC12, The material for this part is ADC12. During the die casting. Higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity. Meanwhile, the...

Aluminum Die Casting Knead and knock Case YL102

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L022766

Aluminum Alloy Die Casting Knead and knock Case YL102 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 10k pieces. The High Precision...

Aluminum Alloy Die Casting hanger bracket YL102

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 180000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L017416

Aluminum Alloy Die Casting hanger bracket is a part applied to Hanger system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer request to develop proto...

Aluminum Alloy Die Casting hanger bracket A380

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 180000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L017401

Aluminum Alloy Die Casting hanger bracket is a part applied to Hanger system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer request to develop proto...

Aluminum Alloy Die Casting hanger bracket ADC12

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 180000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L017400

Aluminum Alloy Die Casting hanger bracket is a part applied to Hanger system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer request to develop proto...

Aluminum Casting Knead and knock Case ADC12

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L011600

Aluminum Alloy Die Casting Knead and knock Case ADC12 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The High Precision...

Al Die Casting Knead and knock Case A380

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L001300

Aluminum Alloy Die Casting Knead and knock Case A380 It is a part applied to suspension system, with the purpose to improve the stability, the comfort, the safety of driving. The part is auto part for famous motor corporation. The part have very good monthly demand, which is around 50k pieces. The High Precision...

Aluminum Die Casting CNC Housings Auto Parts ADC12

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 4000 Piece/Pieces
• Model No.: L015301

Aluminum Die Casting NC Housings Auto Parts ADC12, The material for this part is ADC12. During the die casting. Higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity. Meanwhile,...

Aluminum Die Casting Jack Stand YL102

• Brand: NONE
• Packaging: carton, pallet, steel box, PE pass box
• Supply Ability: 10000/MONTH
• Min. Order: 2000 Piece/Pieces
• Model No.: Z023202

Aluminum YL102 Die Casting Jack Stand, this part is used for elevating the camper trailer, such tool is very popular in western country, so the demand is large, monthly usage is around 25000 sets, the machinery parts consist of a jack housing, a threaded rod for support the camper, which is zinc plated. For such...

Aluminum Fabricated Shapes Egatel Feed Cast -6063

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L005601

Aluminum Fabricated Shapes Egatel Feed Cast is a part applied to communication Equipment, with the purpose to improve the stability, the comfort, the safety of driving. The part is the signal transmission part for famous electrical corporation. Below is the details: Material: Aluminum Product Dimensions:...

Aluminum Die Casting CNC Housings Auto Parts YL102

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 2000 Piece/Pieces
• Model No.: L015302

Aluminum Die Casting NC Housing Auto Parts YL102, The material for this part is YL102. During the die casting. Higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity. Meanwhile,...

Aluminum Die Casting Spray Coating Housings Auto Parts

• Brand: NONE
• Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
• Supply Ability: 60000/MONTH
• Min. Order: 4000 Piece/Pieces
• Model No.: L015300

Aluminum Die Casting NC Housings Auto Parts A380, The material for this part is A380. During the die casting. Higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity. Meanwhile, the...

Aluminum Fabricated Shapes Egatel Feed Cast -6061

• Brand: NONE
• Packaging: carton, pallet
• Supply Ability: 90000/MONTH
• Min. Order: 1000 Piece/Pieces
• Model No.: L005600

Aluminum Fabricated Shapes Egatel Feed Cast is a part applied to Transmission Parts Equipment using in the communication circumstances, with the purpose to improve the stability, the comfort, the safety of driving. The Transmission Parts are the signal transmission part for famous electrical corporation. Below is the...

Zinc Die Casting MOUNT-MOTOR SIDE AWNING REGAL

• Brand: NONE
• Packaging: carton, pallet, steel box, plastic flow box, paper angle bead
• Supply Ability: 90000/MONTH
• Min. Order: 3000 Piece/Pieces
• Model No.: L006602

Zinc Alloy Awning Mount of Motor Side, it is an customized part applied to motor homes, the technology for this part is high pressure die casting, the difficulty for this part is the wall thickness, it is very small, and the allowed draft angle is very small, only 1 degree. From the part, we can easily find that the...

ZAMAC3 Die Casting MOUNT-MOTOR SIDE AWNING REGAL

• Brand: NONE
• Packaging: carton, pallet, steel box, plastic flow box, paper angle bead
• Supply Ability: 90000/MONTH
• Min. Order: 3000 Piece/Pieces
• Model No.: L006601

Zinc Alloy Awning Mount of Motor Side, it is an customized part applied to motor homes, the technology for this part is high pressure die casting, the difficulty for this part is the wall thickness, it is very small, and the allowed draft angle is very small, only 1 degree. From the part, we can easily find that the...

Zinc Alloy Die Casting MOUNT-MOTOR SIDE AWNING REGAL

• Brand: NONE
• Packaging: carton, pallet, steel box, plastic flow box, paper angle bead
• Supply Ability: 90000/MONTH
• Min. Order: 3000 Piece/Pieces
• Model No.: L006600

Zinc Alloy Awning Mount of Motor Side, it is an customized part applied to motor homes, the technology for this part is high pressure die casting, the difficulty for this part is the wall thickness, it is very small, and the allowed draft angle is very small, only 1 degree. From the part, we can easily find that the...

Aluminum Die Casting BNK Knead Knock -AlSi9Cu3

• Brand: NONE
• Packaging: carton, PE pallet
• Supply Ability: 150000/MONTH
• Min. Order: 2000 Piece/Pieces
• Model No.: L017603

Aluminum Die Casting BNK Knead Knock -AlSi9Cu3, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Aluminum Die Casting BNK Knead Knock -A380

• Brand: NONE
• Packaging: carton, PE pallet
• Supply Ability: 150000/MONTH
• Min. Order: 2000 Piece/Pieces
• Model No.: L017206

Aluminum Die Casting BNK Knead Knock -A380, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Aluminum Die Casting BNK Knead Knock -YL102

• Brand: NONE
• Packaging: carton, PE pallet
• Supply Ability: 150000/MONTH
• Min. Order: 2000 Piece/Pieces
• Model No.: L019406

Aluminum Die Casting BNK Knead Knock -YL102, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...